Axle Clean and Press

Axle Clean and Press

What Is the Axle Clean and Press?

Axle Clean and Press is a compound exercise that primarily targets the shoulders, upper back, glutes and quads, and also engages the triceps, lower back, core and forearms. It is an advanced-level movement that takes a loaded axle from the floor to the shoulders and then presses it overhead, so it trains pulling power, grip, a solid front rack and overhead strength in a single rep.

The axle is a thick strongman bar, usually about 1.9 to 2 inches across, made from smooth steel pipe with sleeves that do not spin. It is far harder to hold than a standard barbell, and because the bar cannot turn inside the sleeves, it is hard to whip it up and flip it into the rack the way a Barbell Clean and Press does. Most lifters bring it up in stages with a continental clean instead: they pull it up the thighs, bump it into the hips or onto the stomach with a hip drive, then drive it the rest of the way onto the shoulders. The axle press is one of the standard overhead events in strongman, contested for a single heavy rep or for as many reps as possible in a time limit, and contest rules differ on which styles of clean and press they allow, so check them before competing.

The quads, glutes and lower back do most of the work in the clean, the forearms fight to hold the thick bar, and the upper back holds the rack. The deltoids and triceps finish the press. Unlike the neutral handles of a log, the axle is held with the palms facing forward, so the press follows a path much like a barbell press, close to the face with the head moving back and then through. Lifters choose between a double overhand grip and a mixed grip for the pull, and between a strict press, a push press with leg drive, or a jerk overhead.

The lift suits strongman athletes, who need it as a competition skill, and experienced lifters who want a demanding total-body lift with a heavy grip component. It is not a starting point. Build a solid Barbell Overhead Press, Push Press and Barbell Clean and Press first, then learn the axle clean with an empty or lightly loaded bar before adding weight. Related strongman pressing lifts include the Log Clean and Press and the Viking Press.

Muscles Worked

MuscleActivation
Deltoid
Primary

Instructions

  1. Load the axle evenly, fit collars that suit its thick sleeves, and stand with your feet about hip to shoulder-width apart and the bar over the middle of your feet.
  2. Hinge at the hips and bend your knees, then grip the axle with both palms facing you just outside your knees. Keep your arms straight, back flat and chest up.
  3. Take a deep breath, brace, and push through the floor to lift the axle, keeping it close to your shins and thighs with your arms straight.
  4. As the bar reaches the top of your thighs, drive your hips forward and stand up hard to bump it into your hips and onto your stomach. Do not curl it with your arms.
  5. Without letting the bar slide down, dip again and drive with your legs, pulling your elbows up and around under the bar to bring it onto the front of your shoulders.
  6. Settle the bar across your shoulders with your palms under it and your elbows slightly in front of the bar. Stand tall, take a breath and brace your abs and glutes.
  7. Dip a few inches at the knees with your torso upright, then drive through your legs and press the bar straight up, moving your head back so it clears your face.
  8. Push your head through as the bar passes your forehead and lock your elbows out with the bar directly over your head and shoulders. Hold it there briefly.
  9. Lower the bar to your shoulders under control, then to your hips, and return it to the floor with a flat back before the next rep.

Common Mistakes

  • Curling the axle

    Bending the elbows to pull the bar up instead of driving it with the hips tires the arms before the press and puts the biceps under heavy strain.

  • Letting the bar drift away

    Every inch the axle moves away from the body on the pull or the bump makes it feel heavier and pulls the lower back out of position.

  • Rounding the back on the pull

    Starting the pull with a rounded back and hips too high loads the lower back instead of the legs and hips.

  • Late hand flip on a mixed grip

    Keeping the underhand palm facing up after the bar reaches the hips leaves that arm's biceps exposed for longer than it needs to be.

  • Racking the bar on the fingertips

    Holding the thick bar on the fingers instead of across the shoulders with the palms under it strains the wrists and leaves the press with no solid base.

  • Pressing around the face

    Pressing the bar forward around the face instead of moving the head back and then through leaves it out in front, where it is hard to lock out.

Injuries

Axle Clean and Press is a high risk exercise when performed with proper technique. The axle is heavy, hard to grip and taken from the floor to overhead on every rep. A one-year survey of 213 strongman athletes found the lower back and shoulders were the most commonly injured areas, followed by the biceps and knees, and that athletes were 1.9 times as likely to be hurt during strongman implement training as during traditional lifting once exposure was taken into account.

The biceps are most at risk in the clean, especially for the underhand arm of a mixed grip, when the lifter bends the elbows and curls the bar up instead of driving it with the hips. The lower back is exposed when the bar is pulled off the floor with a rounded back or drifts away from the body. The wrists take strain when the thick bar is racked on the fingertips instead of across the front of the shoulders, and the shoulders and elbows carry the overhead load, so a press that drifts forward or a soft lockout adds stress.

To stay safe, learn the clean on an empty or light axle until it is automatic, keep your arms straight and the bar close, and let the legs and hips move the bar up the body. If you use a mixed grip, turn the underhand palm over as soon as the bar reaches your hips. Brace hard before the pull and before the press, rack the bar across your shoulders with your palms under it, and lower it in stages rather than dropping it onto your stomach or shoulders. If the full lift is too much, regress to the Barbell Clean and Press or the Push Press. To progress, add load gradually, then move to reps against a clock.

Stop the set if you feel a pop or sharp pain in the front of the elbow or upper arm, pain that shoots down a leg, a pinching pain in the shoulder overhead, or sharp wrist pain in the rack. A sudden pop at the elbow during a clean can mean a biceps tendon injury and needs prompt medical assessment.

Frequently Asked Questions

Q: Why is an axle harder to clean than a barbell?

The bar is thick and smooth, so your grip gives out sooner, and because it does not spin inside the sleeves it is hard to flip into the rack in one fast pull. In a study of resistance-trained men, fitting thick grip attachments to a barbell lowered their one-rep max on the deadlift, bent-over row, upright row and concentration curl, which shows how much a thick handle limits what you can pull.

Q: Should I use a double overhand or a mixed grip?

A mixed grip lets many lifters hold more weight off the floor, but the underhand arm's biceps is under strain until that hand turns over at the hips. A double overhand grip is the safer way to learn the lift, and lifters who switch to a mixed grip for heavy attempts keep their arms straight and turn the underhand palm over as early as they can.

Q: What is a continental clean, and is it allowed in competition?

A continental clean brings the axle up in stages, from the thighs to the hips or stomach and then onto the shoulders, instead of in one explosive pull. Many strongman events allow it, but some do not let the bar rest on the belt, so read the rules for the contest you are entering.

Q: Should I strict press, push press or jerk the axle?

Use the style that lets you lock out the most weight consistently and that the event allows. Most lifters push press or jerk the axle in competition, while strict pressing is still worth training to build the overhead base.

Q: What can I train if I don't have an axle?

The Barbell Clean and Press and Push Press build the same pulling and pressing strength, and thick grip attachments on a barbell add some of the grip challenge. None of them copies the axle's smooth, fixed sleeves or the staged clean, so practice on a real axle before a competition.

Turn any exercise into a full workout.

Free for up to 5 clients, with 30 days of Pro to start. No credit card required.