Barbell Pin Front Squat

What Is the Barbell Pin Front Squat?
Barbell Pin Front Squat is a compound exercise that primarily targets the quads and also engages the glutes, adductors, trunk and upper back. It is an intermediate-level movement in which a barbell held in the front rack position is driven up from safety pins set inside a power rack, then lowered back down to rest on them, so every rep starts from a dead stop.
The point of the pins is to take away the bounce out of the bottom. With the bar resting on the pins, most of the tension built up on the way down is gone, so the legs and trunk have to produce force quickly from a standstill. Weightlifters and strength coaches use it to build drive out of the bottom of the squat and to strengthen one chosen part of the range, most often around parallel where many lifters stall. Because the pin height sets the depth, it is also a way to keep squatting through a limited range when pain makes full-depth squats a problem.
Pin height decides how much range you train. Pins set so the bar touches with your thighs about parallel cover most of the range of a regular Barbell Front Squat, while raising them shortens the lift and lets you work the top portion with more weight. The front rack keeps the torso upright and the work on the legs quad-led: in a study of 11 NCAA Division I athletes squatting the same weights both ways, the back squat placed greater demands on the hip extensors, while the front squat, at the heaviest load tested, placed greater demands on the knee extensors. Holding the bar in the rack also asks a lot of the upper back, which has to stay upright so the elbows do not drop. The Barbell Anderson Squat is the same dead-stop idea with the bar on the upper back.
This variation suits lifters who already front squat with a steady rack position and consistent depth. If the front squat itself is still being learned, build up with the Dumbbell Goblet Squat, the Smith Machine Front Squat or a light Barbell Front Squat first, and expect to use less weight than on your regular front squat when you add pin front squats, because there is no rebound to help out of the bottom.
Muscles Worked
- Vastus Lateralis
- Primary
- Vastus Medialis
- Primary
- Adductor Magnus
- High
- Gluteus Maximus
- High
- Rectus Femoris
- High
- Erector Spinae
- Medium
- Rectus Abdominis
- Medium
- Upper Trapezius
- Medium
- Deltoid
- Low
- Soleus
- Low
Instructions
- Set the safety pins in a power rack so the bar rests on them at the depth you want to train, usually with your thighs about parallel to the floor, and load the bar while it sits on the pins.
- Squat down under the bar and take a clean grip just outside your shoulders, fingertips under the bar.
- Move in until the bar rests on the front of your shoulders, close to your throat, and drive your elbows up and forward so they point in front of the bar.
- Set your feet about shoulder-width apart with your toes turned slightly out, chest up and weight over the middle of your feet, in your normal bottom squat position.
- Take a deep breath and brace your trunk.
- Drive up through your whole foot, lifting the bar off the pins with your elbows high and torso upright, until you are standing tall.
- Breathe out at the top, then take a fresh breath and brace again.
- Bend your hips and knees together to lower under control, keeping your elbows up and your knees tracking over your toes, until the bar settles softly onto the pins.
- Let the bar come to a complete stop for a moment while you keep your brace and upper back tight, then drive up for the next rep. After the last rep, set the bar down on the pins and step out from under it.
Common Mistakes
Setting the pins at the wrong height
Pins set too low force you to fold forward to get under the bar, while pins set too high cut short the depth you meant to train.
Dropping the elbows
Letting the elbows sink as you drive up lets the bar roll forward, rounds the upper back and pulls the torso over.
Holding the bar in the hands
Gripping the bar in the palms instead of resting it on the front of the shoulders loads the wrists and makes the rack unstable.
Crashing the bar onto the pins
Dropping the bar onto the pins creates a bounce that defeats the dead stop and jars the shoulders and spine.
Leaning forward to find the pins
Reaching down for the pins with your chest instead of squatting to your normal depth shifts the load onto the lower back.
Hips rising first
Driving the hips up ahead of the chest tips the torso forward, drops the elbows and can roll the bar off the shoulders.
Injuries
Barbell Pin Front Squat is a medium risk exercise when performed with proper technique. The bar sits on the front of the shoulders and the hardest moment of every rep comes from a dead stop at the bottom, so the knees, hips and lower back take most of the strain if the torso tips forward. The front rack also puts the wrists and elbows in a demanding position, and a stiff upper back or tight wrists can make it uncomfortable. The pins do add a safety stop, since a missed rep can simply be lowered back onto them.
Most problems come from the setup. Pins set too low make you fold forward or round your back to get under the bar, and pins set too high cut the depth you meant to train, so test the height with an empty bar before loading it. Get into your normal bottom position before the first drive rather than reaching down for the bar, and lower the bar back onto the pins under control instead of dropping it. If your wrists hurt in the rack, widen your grip, let the bar rest on just the fingertips, or switch to a cross-arm grip, because the bar should sit on your shoulders, not in your hands.
If the pin front squat feels unstable or stresses your back or wrists, raise the pins a notch, go back to a regular Barbell Front Squat, or regress to a Smith Machine Front Squat or a Dumbbell Goblet Squat. Progress by lowering the pins toward full depth, adding load gradually, or lowering the bar more slowly between reps. Stop the set if you feel sharp pain in the knees, hips, lower back or wrists, a pinching sensation at the front of the hip at the bottom, or numbness or tingling in the hands or down the legs.
Other Names for the Barbell Pin Front Squat
The Barbell Pin Front Squat is also known as:
- Bottom-Up Front Squat
Frequently Asked Questions
- Q: Do you start a pin front squat from the pins or lower down to them?
It is usually started from the pins, with the bar set at the depth you want to train, and every rep after that is lowered back onto the pins and started again from a dead stop. Some lifters unrack the bar from the hooks and lower to the pins for the first rep, which trains the same thing once the bar comes to a full stop.
- Q: How high should I set the pins?
Set them so the bar rests on them at the depth you want to train, which for full range is with your thighs about parallel to the floor. Check the height with an empty bar, because you should be able to get under the bar in your normal bottom position without leaning forward or rounding your back.
- Q: How much weight should I use compared with a regular front squat?
Expect to use less than on your regular Barbell Front Squat, because the pins take away the rebound out of the bottom. Raising the pins shortens the range and usually lets you lift more.
- Q: What if I can't hold the front rack position?
Try a slightly wider grip and let the bar rest on your fingertips rather than in your palms, since the shoulders should hold the bar, not the hands. If that still does not work, a cross-arm grip with the hands on top of the bar takes most of the stretch off the wrists.
- Q: What is the difference between a pin front squat and a paused front squat?
In a paused front squat you hold the bottom position with the bar still on your shoulders, so your legs stay loaded through the pause. On the pins the bar comes to rest and most of that built-up tension is released, so the drive up has to be produced more quickly from a standstill.
- Q: How should I program pin front squats?
Most programs use them for sets of 3 to 5 reps, with occasional heavier sets of 1 to 2, as one squat variation alongside regular full-depth squatting rather than as a replacement for it.




