Barbell Squat with Chains

Barbell Squat with Chains

What Are Barbell Squat with Chains?

Barbell Squat with Chains is a compound exercise that primarily targets the quads and glutes and also engages the adductors, lower back and core. It is an advanced-level movement: a standard high-bar back squat with heavy chains hung from each end of the barbell, so the load on the bar changes through every rep.

As you squat down, the chain links pile up on the floor and the bar gets lighter. As you stand up, the links lift off the floor and the bar gets heavier again. This matches the squat's strength curve, since you are weakest near the bottom and strongest near lockout. The result is a squat that stays challenging through the top half, rewards driving hard out of the bottom and teaches you to keep accelerating all the way to lockout instead of easing off.

Chains are a staple of powerlifting training, especially conjugate or Westside-style programs. On dynamic effort days, lifters squat a fairly light bar plus chains for fast sets of two reps, and chains also show up on heavier days to overload lockout. It is a training variation rather than a competition lift, and it usually takes the place of the main squat in a session or follows it as a heavy secondary lift.

The movement pattern is the same as the Barbell Squat, so the muscle work is too: the quads and glutes drive the lift, the adductor magnus helps out of the bottom and the spinal erectors keep the torso braced. Chains change where in the rep the load is heaviest rather than which muscles do the work. In a study of 11 NCAA Division I athletes who swapped about 10% of their squat load for chains, quadriceps and hamstring activity and ground reaction forces were no different from a plate-loaded squat. The same chains can go on a Barbell Low Bar Squat for more hip and less knee emphasis, or on a Barbell Box Squat to control depth.

This variation suits powerlifters, strength athletes and experienced lifters who want a stronger lockout and more bar speed. Chains add a shifting, slightly swinging load, so build a consistent barbell squat first, with repeatable depth, a solid brace and steady bar path, before adding them.

Muscles Worked

MuscleActivation

Instructions

  1. Set a barbell in a squat rack at about shoulder height and hang an equal length of chain from each sleeve so most of each chain piles on the floor at the bottom of your squat and only a few links touch the floor when you stand tall. Load the plates and set the safety pins just below your bottom position.
  2. Step under the bar and rest it across your upper traps, gripping it with your hands just outside shoulder width and your elbows pointing down.
  3. Brace your core, stand up to unrack the bar, and take two or three short steps back, letting the chains settle before you start.
  4. Set your feet about shoulder-width apart with your toes turned slightly out, chest up and eyes forward.
  5. Take a deep breath, brace, and squat down by bending your hips and knees together, keeping your knees in line with your toes.
  6. Lower under control until your thighs are about parallel to the floor, keeping your back neutral and your heels down as the chains pile onto the floor.
  7. Drive through your whole foot and push hard out of the bottom, keeping your chest and hips rising together.
  8. Keep accelerating as the chains lift off the floor and the load increases, and finish standing fully tall. Exhale at the top.
  9. Repeat for the desired number of reps, then walk the bar back into the rack, making sure the chains clear the uprights.

Common Mistakes

  • Wrong chain length

    Chains that never leave the floor add almost no load at the top, while chains that hang clear of the floor at the bottom never unload and swing through the whole rep.

  • Uneven chains

    Hanging chains of different lengths or weights on each side tilts the bar and loads one leg more than the other.

  • Too much chain weight

    If the bar grinds to a near stop as the chains lift off the floor, the chain load is too heavy for the bar weight and the lift loses its speed and its purpose.

  • Easing off near the top

    Slowing down once the hardest part of the rep is over wastes the extra load the chains add near lockout, so keep pushing hard all the way up.

  • Hips shooting up first

    Letting the hips rise faster than the chest as the load climbs tips the torso forward and shifts the strain from the legs to the lower back.

  • Rushing the walkout

    Taking long or hurried steps back with the chains swinging and dragging makes it hard to set your feet and brace before the first rep.

Injuries

Barbell Squat with Chains is a medium risk exercise when performed with proper technique. The main strain points are the lower back, the knees and the hips, the same as any heavy back squat. Chains add their own risks: you unrack and walk out with the heaviest load, because almost all of the chain is off the floor when you stand, and chains that drag, swing or catch on the rack uprights can pull the bar off balance.

Set the safety pins or arms just below your bottom position, and hang the chains so a few links stay on the floor at the top, which keeps them from swinging. Use a spacer collar or hang the chains outside the uprights so they clear the rack, and keep the walkout to two or three short steps. As the load climbs near lockout, keep your chest and hips rising together; letting the hips shoot up first turns the top of the squat into a loaded good morning and shifts the strain to your lower back.

If the full chain load is too much, go back to the Barbell Squat with straight weight, or use a Barbell Box Squat to control depth while you learn to push hard out of the bottom. Progress by adding chain weight in small steps, only while every rep stays fast and your technique stays the same from the first rep to the last.

Stop the set if you feel sharp pain in your knees, hips or lower back, if the bar starts to tilt or the chains swing so much that you lose your balance, or if reps slow down so much that your form breaks near lockout.

Other Names for Barbell Squat with Chains

Barbell Squat with Chains are also known as:

  • Chain Back Squat

Frequently Asked Questions

Q: How much chain weight should I use for squats?

Start with chains that add about 10 percent of the bar's load at the top and add more only while every rep stays fast, with no clear slowdown as the chains lift off the floor. Many powerlifting programs work up to 20 percent or more for strong, experienced lifters.

Q: How should the chains be hung on the bar?

Hang an equal length from each sleeve, either looped directly over it or suspended from a lighter lead chain, so most of each chain piles on the floor at the bottom and only a few links touch the floor at the top. Keeping a few links down at the top stops the chains from swinging, and marking the setting makes it quick to repeat.

Q: Should I put less weight on the bar when squatting with chains?

Yes, because the chains add their weight on top of the plates once you stand up. On speed-focused days, conjugate-style programs often load about 40 to 50 percent of your max on the bar plus chains and move each set of two reps as fast as possible.

Q: Are chains or bands better for squats?

Chains are easier to set up and measure, since their weight is known and they need no anchor points, and they do not pull the bar down faster than gravity on the way down. Bands add tension more sharply toward the top and speed up the descent, which makes them harder to control, so chains are usually the better first choice.

Q: Can squatting with chains improve my regular squat?

Chains are a tool for building lockout strength and bar speed alongside regular heavy squats, not a replacement for them. They can also help as a warm-up: in a study of 16 recreationally active men, a chain-loaded squat warm-up at 85% of their max led to a 6.2% higher free-weight one-rep max than the same warm-up with free weights.

Turn any exercise into a full workout.

Free for up to 5 clients, with 30 days of Pro to start. No credit card required.