Machine Lat Pulldown (Reverse Grip)

Machine Lat Pulldown (Reverse Grip)

What Is the Machine Lat Pulldown (Reverse Grip)?

Machine Lat Pulldown (Reverse Grip) is a compound exercise that primarily targets the back, especially the latissimus dorsi, and also engages the biceps, the teres major and the muscles between the shoulder blades. It is a beginner-level movement performed seated on a plate-loaded pulldown machine, pulling two independent handles from overhead down to shoulder height with an underhand grip.

The exercise builds vertical pulling strength and back width without the balance demands of a free bar. Thigh pads hold the hips down and the lever arms guide each handle along a fixed arc, so the effort goes into the pull rather than into staying in position. Because each arm moves on its own lever, the stronger side cannot quietly take over, and the machine can also be worked one arm at a time. It usually sits early or in the middle of a back or pull session, in moderate rep ranges such as 8 to 12 reps.

The underhand grip keeps the hands about shoulder-width apart and the elbows in front of the body, so the elbows travel down and back close to the sides rather than sweeping down from wide out to the sides. That is the same pattern as a Chin-Up, and the palms-up position puts the biceps in their strongest line of pull for bending the elbow. For the same pattern with a single bar and a free path, use the Cable Lat Pulldown (Reverse Grip). For the overhand version on a machine, use the Machine Lat Pulldown.

The exercise suits beginners learning to pull with the back instead of the arms, lifters building toward their first chin-up, and anyone who wants to load a vertical pull heavily with little setup. The feeling to chase is the elbows driving down toward the hips while the shoulders stay away from the ears. If the palms-up grip bothers the wrists or elbows, start with the overhand machine version, and if the shoulders keep shrugging at the top, practice the Cable Straight-Arm Pulldown to learn how to set the shoulder blades down first.

Muscles Worked

MuscleActivation
Deltoid
Medium

Instructions

  1. Load the same plates on both sides of the machine and set the seat so your thighs fit snugly under the thigh pads with your feet flat on the floor.
  2. Stand, reach up and grip each handle with an underhand grip, palms facing you and hands about shoulder-width apart or slightly wider.
  3. Sit down and wedge your thighs under the pads, with your arms fully extended overhead and your chest up.
  4. Keep your torso upright or leaning back only slightly, and start the pull by drawing your shoulders down away from your ears.
  5. Drive your elbows down and slightly back, pulling the handles in an arc until your hands reach shoulder height in front of your shoulders.
  6. Pause briefly with your chest up and your shoulder blades drawn down and together.
  7. Let the handles rise slowly until your arms are fully extended and you feel a stretch along your sides, without letting your shoulders shrug up.
  8. Repeat for the desired reps, then return the handles to the top under control before letting go.

Common Mistakes

  • Leaning back and swinging

    Rocking the torso back to start each rep turns the pull into a momentum lift and shifts load from the back onto the lower back.

  • Curling the handles

    Leading with the hands and bending the wrists turns the movement into a biceps curl instead of driving the elbows down toward the hips.

  • Shrugging at the top

    Letting the shoulders ride up toward the ears at full stretch takes tension off the lats and puts it on the shoulder joint.

  • Cutting the range short

    Stopping the handles well above shoulder height or never letting the arms straighten overhead leaves much of the movement untrained.

  • Pulling one side ahead

    Because the handles move independently, letting the stronger arm lead lets the weaker side do less work without it being obvious.

  • Letting the arms fly up

    Releasing the handles at the bottom or letting them rise fast yanks the shoulders and elbows and wastes the lowering phase.

Injuries

Machine Lat Pulldown (Reverse Grip) is a low risk exercise when performed with proper technique. The machine fixes the path of each handle and the thigh pads hold the body in place, so there is little to balance. The usual strain points are the front and inner elbow and the wrists, which carry more load with the palms turned up, the shoulders when they are allowed to shrug up at the top, and the lower back when the torso rocks back to move a heavy weight.

To keep it comfortable, choose a load you can lower slowly, keep the wrists straight rather than bent back, and let the arms reach full extension at the top without the shoulders riding up toward the ears. Keep the torso upright or leaning back only slightly, and pull with the elbows rather than curling the handles toward you. When the set is over, return the handles to the top under control before letting go, because released lever arms swing up fast.

If the underhand grip irritates the elbows or wrists, lighten the load or switch to the overhand Machine Lat Pulldown for a while, and rotate grips across the week rather than always pulling palms up. To progress, add load in small steps, add a pause at the bottom, or move toward bodyweight pulling with the Assisted Chin-Up and then the Chin-Up.

Stop the set if you feel sharp pain at the front or inside of the elbow, pinching in the front of the shoulder, or numbness or tingling running into the hand, and have persistent elbow or shoulder pain assessed before training through it.

Frequently Asked Questions

Q: Does the reverse grip work the lats more than an overhand grip?

No. On a cable lat pulldown, a study of 12 healthy men found an overhand grip produced more lat activity than an underhand grip at both a narrow and a wide width, with no difference in biceps activity, and a larger study of 40 trained men found no significant difference in lat activity across seven grips, including a shoulder-width underhand grip. Use the grip that feels best on your shoulders and elbows, and rotate it with the overhand version.

Q: Will this exercise help me do my first chin-up?

It helps by training the same underhand pulling pattern with a load you can set below your body weight, but it does not train the core and body control needed to hang from a bar. Pair it with the Assisted Chin-Up and test your progress with the Chin-Up.

Q: Can I use this machine one arm at a time?

Yes. Each handle moves on its own lever arm, so you can pull with one arm while the other handle stays at the top, or alternate arms. Keep the torso square and still so you do not twist toward the working side.

Q: How is it different from the cable reverse-grip pulldown?

The machine guides each handle along a fixed arc and loads each arm separately, so a stronger side cannot help the weaker one. The Cable Lat Pulldown (Reverse Grip) uses one bar and a free path, which asks for more control and lets you choose exactly where the bar travels.

Q: Why do my elbows or wrists hurt with the underhand grip?

Holding the palms fully turned up under load stresses the wrists and the tendons at the front and inside of the elbow, and some lifters tolerate it poorly, especially with heavy weights. Lighten the load, keep the wrists straight, and switch to the overhand Machine Lat Pulldown if the pain persists.

Turn any exercise into a full workout.

Free for up to 5 clients, with 30 days of Pro to start. No credit card required.