Smith Machine Behind the Neck Press

Smith Machine Behind the Neck Press

What Is the Smith Machine Behind the Neck Press?

Smith Machine Behind the Neck Press is a compound exercise that primarily targets the shoulders and also engages the triceps, upper trapezius and serratus anterior. It is an intermediate-level movement, performed seated on an upright bench inside a Smith machine, with the bar lowered behind the head and pressed straight overhead.

The Smith machine's rails keep the bar on a fixed vertical track and its safety stops can be set to catch a missed rep, so there is no bar to balance and no need for a spotter. That makes it a common bodybuilding choice for loading the delts hard while the rest of the body stays still. The rails do not change what happens at the shoulder, though. The bottom of the rep still holds the upper arms out to the side and rotated back, and because the track cannot move, bench placement alone decides where the bar travels relative to the head.

The behind-the-neck path moves some of the work away from the front of the shoulder. In a comparison of seated free-barbell presses in 14 resistance-trained men, pressing behind the neck drew more rear delt, upper trap and triceps activity while lowering the bar, and pressing in front of the face drew more front delt and chest activity. The Smith version shares that shoulder position, while the Smith Machine Shoulder Press uses the same machine with the bar in front of the face.

This variation suits lifters with healthy, mobile shoulders who already press comfortably in front of the face and want another angle for their delts. It is optional rather than essential, and every shoulder goal can be met without it. Build a solid base on the Smith Machine Shoulder Press or Dumbbell Shoulder Press first, and use the free-weight Barbell Behind the Neck Press only once the position feels natural and you want the extra balance demand.

Muscles Worked

MuscleActivation
Deltoid
Primary

Instructions

  1. Set an upright bench inside the Smith machine so the bar track sits just behind the back of your head when you sit tall against the pad.
  2. Set the safety stops just below the lowest point you will lower the bar to, about ear level, and set the bar on a hook a few inches above the top of your head.
  3. Sit with your back and hips against the pad and your feet flat on the floor, a little wider than your hips.
  4. Take an overhand grip well outside shoulder width, wide enough that your forearms will be vertical with the bar at ear level.
  5. Brace your core, press the bar up slightly and turn it off the hooks.
  6. Keep your head neutral and your eyes forward, then lower the bar under control behind your head to about ear level, keeping your elbows under the bar.
  7. Press the bar straight up until your arms are straight overhead, without pushing your head forward or arching off the pad.
  8. Lower again under control and repeat for your reps.
  9. After the last rep, press the bar to hook height and turn it back onto the hooks.

Common Mistakes

  • Pushing the head forward

    Jutting the chin forward to let the bar pass strains the neck and usually means the bench sits in the wrong spot relative to the bar track.

  • Forcing the depth

    Dragging the bar down to the base of the neck when the shoulders lack the range strains the front of the shoulder, so stop at the depth you control with the head neutral.

  • Leaving the safety stops low

    Stops left at the bottom of the rails cannot catch a failed rep before the bar reaches the neck and shoulders.

  • Arching off the back pad

    Leaning back and lifting the lower back off the pad turns the press into a steep incline press and shifts load onto the lower back.

  • Gripping too narrow

    A grip near shoulder width lets the elbows drift behind the bar and bends the wrists back at the bottom, adding strain to both joints.

  • Loading like a front press

    Starting with the weight you use on a front Smith press skips the light sets the behind-the-neck position needs, since most lifters press noticeably less this way.

Injuries

Smith Machine Behind the Neck Press is a medium risk exercise when performed with proper technique. The rails and safety stops remove the balance problem and the risk of a free bar dropping behind the neck, but they do not change the bottom position, where the upper arm is held out to the side and rotated back. That position loads the front of the shoulder joint and the rotator cuff, and it asks for more external rotation than a front press. The neck is the other strain point, mostly when the head is pushed forward to clear the bar.

The position's reputation is partly earned and partly folklore. A survey and clinical exam of 159 healthy men found that weight trainers who did behind-the-neck presses or pulldowns were more likely to show signs of a loose, unstable front of the shoulder, while those who trained their external rotators were less likely to. That is an association, not proof that the exercise causes injury, and it does not mean the press harms shoulders that reach the position comfortably. It is still a clear reason for anyone with current shoulder pain, a past dislocation or partial dislocation, known shoulder instability or a labral repair to choose the Smith Machine Shoulder Press or Dumbbell Shoulder Press instead.

To keep the risk down, test the position with an empty bar before loading it, and lower only as far as you can with your head neutral, your back on the pad and no pinch at the front of the shoulder. Warm up the rotator cuff with Band Shoulder External Rotation, set the safety stops just below your lowest point, and keep one or two reps in reserve. If the full depth is uncomfortable, stop the bar at the top of the head instead of ear level; once the position feels easy, add load in small steps.

Stop the set at once for sharp pain at the front or top of the shoulder, a feeling of the shoulder shifting or clunking, pain, tingling or numbness running down the arm, or neck pain. Pain that lasts more than a few days should be checked by a clinician before you press behind the neck again.

Frequently Asked Questions

Q: Is the behind-the-neck press bad for your shoulders?

It depends on the shoulder. For lifters with healthy, mobile shoulders who use moderate loads and control the depth, it is a reasonable delt exercise, but it leaves less margin than a front press, and anyone with current shoulder pain or a history of dislocation or instability is better served by the Smith Machine Shoulder Press.

Q: Is the Smith machine version safer than the barbell version?

It removes some risks but not the main one. The rails and safety stops mean you never balance the bar and a missed rep cannot land on your neck, but your shoulders reach the same rotated-back position at the bottom as on the Barbell Behind the Neck Press.

Q: How can I tell if my shoulders can handle it?

Sit against the pad with an empty bar and lower it behind your head toward ear level. If you can get there without pushing your head forward, arching your back off the pad or feeling a pinch at the front of the shoulder, the position suits you; if not, stop higher or press in front of the face instead.

Q: Where should the bench go in the Smith machine?

Place it so the bar track sits just behind the back of your head when you sit tall against the pad. If the bar would hit your head, you will end up ducking forward; if it runs far behind you, your shoulders get pulled further back than they need to.

Q: How wide should my grip be?

Wider than for a front press, usually well outside shoulder width, so your forearms are vertical and your elbows sit under the bar when it is at ear level. Adjust a little either way until the bottom position feels stable in the wrists and shoulders.

Q: How much weight should I use?

Less than on a front Smith press. Start with the empty bar to check the position, then build up over a few sessions, staying in moderate rep ranges and keeping a rep or two in reserve.

Turn any exercise into a full workout.

Free for up to 5 clients, with 30 days of Pro to start. No credit card required.