Smith Machine Decline Bench Press (Close Grip)

Smith Machine Decline Bench Press (Close Grip)

What Is the Smith Machine Decline Bench Press (Close Grip)?

Smith Machine Decline Bench Press (Close Grip) is a compound exercise that primarily targets the triceps and also engages the chest and front shoulders. It is an intermediate-level movement that combines three changes to a standard bench press: a guided Smith machine bar, a bench set with the head lower than the hips, and an overhand grip at about shoulder width. Together they turn the press into a heavy elbow-straightening exercise, with the chest still doing a large share of the work.

The main reason to use it is to load the triceps with more weight than isolation exercises allow, which builds arm size and the lockout strength that finishes a bench press. The Smith machine bar runs on a fixed track and can be racked at any point by rotating it onto the hooks, so you can push close to failure without balancing the bar and, with the safety stops set, without a spotter. It usually comes after the main chest press of a session or as the first triceps exercise on a push or upper-body day, in moderate rep ranges such as 6 to 12.

Grip width is what moves the work toward the triceps. With the hands at shoulder width and the elbows tucked, the elbows bend and straighten through a longer arc than in a wide-grip press, while bringing the hands much closer together adds wrist and elbow strain rather than extra triceps work. The decline angle shortens the bar's path and tends to ask less of the front shoulders than a flat or incline press, so many lifters handle a little more weight here. For a longer range of motion, press on a flat bench with Smith Machine Bench Press (Close Grip); for more chest work on the same bench, widen the grip to Smith Machine Decline Bench Press.

It suits intermediate lifters chasing a stronger lockout, bodybuilders who want heavy triceps work, and lifters whose shoulders tolerate a narrow, tucked press better than a wide one. Before loading it, build basic triceps strength with Cable Triceps Pushdown (Straight Bar) and learn the tucked-elbow press on the flat bench. Anyone who feels dizzy or pressure in the head when lying head-down is better served by the flat version.

Muscles Worked

MuscleActivation
Deltoid
Medium

Instructions

  1. Set a decline bench inside the Smith machine so the bar lines up over your lower chest, then set the safety stops just below the height where the bar will touch your chest.
  2. Lie back with your head at the low end and hook your feet under the roller pads with your knees bent.
  3. Grip the bar overhand with your hands about shoulder width apart, thumbs wrapped around the bar and the bar resting over the heel of each palm.
  4. Pull your shoulder blades back and down into the bench, then rotate the bar off the hooks and hold it with straight arms over your lower chest.
  5. Breathe in and lower the bar under control to your lower chest, keeping your elbows tucked close to your sides.
  6. Touch your lower chest lightly without bouncing, with your forearms pointing straight up and your wrists straight.
  7. Breathe out and press the bar back up by straightening your elbows until your arms are fully extended over your lower chest.
  8. Repeat for the planned reps, then rotate the bar back onto the hooks and sit up slowly.

Common Mistakes

  • Grip too narrow

    Placing the hands close together or touching bends the wrists and pushes the elbows out, adding joint strain without adding triceps work.

  • Elbows flaring out

    Letting the elbows drift out to the sides turns the lift into a narrow chest press and shifts stress to the front of the shoulder.

  • Touching too high on the chest

    Lowering the bar toward the upper chest or neck tips the forearms out of line and strains the wrists and shoulders, so the bar should meet the lower chest.

  • Wrists bent back

    Letting the bar roll toward the fingers bends the wrists back under load instead of keeping the bar over the heel of the palm in line with the forearm.

  • Safety stops set too low

    Leaving the stops at the bottom of the frame means a missed rep can pin the bar on your chest while you are lying head-down.

  • Bouncing the bar off the chest

    Dropping the bar fast and rebounding it off the sternum takes work away from the triceps and jars the chest and shoulders.

Injuries

Smith Machine Decline Bench Press (Close Grip) is a medium risk exercise when performed with proper technique. The fixed bar path and the hooks make a missed rep easier to handle than with a free barbell, but the bar can still pin you on a decline if the safety stops are set too low, and the narrow grip concentrates stress on the wrists and elbows. The front of the shoulder is the third common strain point, mostly when the elbows flare out or the bar touches too high on the chest.

Moving the hands in is a common choice for lifters with sensitive shoulders. In a study of ten experienced strength athletes pressing a light barbell on a flat bench, wider grips raised the total load on the shoulder joint and the acromioclavicular joint, while a shoulder-width grip raised upward shear on the shoulder joint compared with a medium grip, so anyone with pain at the top of the shoulder may do better slightly wider. Keep the hands at about shoulder width with the wrists straight over the forearms, the elbows angled in toward the ribs without pinning them, and the bar lowered under control to the lower chest without bouncing.

Set the safety stops just below the height where the bar touches your chest before loading the bar, and hook your feet securely under the pads. Breathe steadily rather than holding your breath through a long set, and sit up slowly afterward, since the head-down position can leave you lightheaded. To regress, press on a flat bench with Smith Machine Bench Press (Close Grip) or switch to Dumbbell Press (Close Grip); to progress, move to the free-weight Barbell Bench Press (Close Grip) or add a pause on the chest.

Stop the set if you feel sharp pain in the wrist, elbow or front of the shoulder, or a headache, dizziness or pressure behind the eyes. Anyone with high blood pressure or an eye condition such as glaucoma should check with a doctor before training head-down and can use the flat version meanwhile.

Frequently Asked Questions

Q: How close should my hands be?

About shoulder width apart, or just inside it. A good check is that your forearms point straight up when the bar touches your lower chest; going much narrower mostly adds strain on the wrists and elbows.

Q: Does a close grip work the triceps harder than a wider grip?

Compared with a wide grip, yes. In a study of 28 men pressing a free barbell on a flat bench, a wide grip produced lower triceps activity than medium or narrow grips, and the narrow grip allowed the lightest six-rep loads, so the gain comes from leaving the wide grip behind rather than from squeezing the hands together.

Q: Is the decline version better for the triceps than the flat one?

Not clearly. The decline shortens the bar's path and usually lets you use a little more weight, while the flat Smith Machine Bench Press (Close Grip) takes the elbows through a longer range, so many lifters simply rotate between the two.

Q: Do I need a spotter on the Smith machine?

Not usually, as long as the safety stops sit just below the point where the bar touches your chest and you can rotate the bar back onto the hooks. A spotter is still worth having for sets taken to failure.

Q: Is the Smith machine version as good as a free barbell?

For building the triceps and chest, both work. Because the Smith bar does the balancing for you, strength built on it carries over less fully to a free barbell, so lifters training for a barbell bench press should also press with Barbell Bench Press (Close Grip).

Turn any exercise into a full workout.

Free for up to 5 clients, with 30 days of Pro to start. No credit card required.